Residential pools generally measure up to 6 metres x 15 metres in size, are finished with ‘bag’ liners, ‘onsite liners’ or tiles and have filtration rates at 6 to 8 hours per turn around.

Isca Pools will specify the pool pipework, fittings, pump and filtration for a given pool size, but the following components need to be considered and specified by the client.

Method of the pool shell construction - steel panel, resin panel, reinforced concrete, hollow block & render or 9” block & render

Water line finish   - skimmers, deck level or infinity

Pool finish - ‘bag’ liner, on site liner, or tiles

Pool cover - manual or powered floating solar cover, manual or powered floating slatted cover, manual or powered safety or even a manual or powered enclosure.

Pool heating - gas, oil, electric, solar, air source heat pump or ground source heat pump

Pool Access - ladder steps, Roman end steps or lined internal steps

Pool Lighting - number of lights and colour of lights

Pool Sanitation  Salt water chlorination, liquid chlorine, tablet / granular chlorine, bromine or oxygen

Pool Copingstones  Sloping or flat top, white or coloured concrete or natural stone (e.g. Sandstone, Limestone, Slate, Basalt etc)

The above components relate to both outdoor and indoor pools, but the following will also need consideration if the pool is indoor.

Pool hall heating / dehumidification / ventilation - stand alone or integrated systems

Pool hall flooring - Tiled surface or rubber crumb surface